Description

This is a brand new complete walnut veneer wood door panel and black vinyl console trim kit. This is the correct kit for 1963 Buick Riviera models. This is the correct kit for cars with deluxe interior (long wood door panels). This is a very nice complete kit.

These kits are in stock and ready to ship! All of these pieces will be shipped flat on a stiff piece of wood to prevent any damage during shipping.
All of the walnut veneer was laser cut and professionally finished in a spray booth at high end custom cabinetry shop.

For the 4 door panel pieces you will need to cut the holes in them from the back side after installing them on the metal panels depending on if you have window cranks and / or for the remote mirror control etc.

Both radio bezel piece are also included (air conditioned and non air conditioned version).

The 9th picture shows a close up of the new black vinyl in this kit.

The 10th picture shows the original vinyl of the 1963 Riviera on the bottom compared to the new vinyl on the top (the grain and texture is very close).

The 8th picture shows how the door panel pieces are grain matched as well as book matched.

The last 2 pictures of the listing show different examples of the walnut wood veneer (different color variations, grain, and knots etc.)

Please fully read all of the disclaimers below.

Wood Grain Disclaimer:

All wood grain console pieces are grain matched; meaning that the console pieces were cut out of the same piece, so they are fluid. This applies to the door panels as well. The door panels are also book matched to each other (mirror images from left to right side). Wood is a natural resource; therefore, pieces may vary in color, texture and grain. Wood characteristics naturally occurring such as variations in color, grain, mineral streaks and knots are NOT considered defects. (Knots are infrequent due to the use quarter sawn walnut). The purpose of the photos shown are to display the type of product being sold, not to show an exact replica. NO two console kits NOR door panel kits will EVER look the same as the wood grain comes from real trees and NO two trees are the same.

Fitment / Size Disclaimer:

Wood by nature will expand and contract as it adjusts to changes in humidity and temperature. This is the best fitment due to variations in the size of the original metal pieces. We decided on the size of these pieces since we found that there can be slightly variation in the size of the console trim/radio bezel chrome piece. Also, some customers are having these pieces re-chromed which can also slightly change the size. Lastly the size difference is extremely small. For example, when attaching the console and door pieces, please try to center the piece top to bottom and left to right. When installed centered in both directions, any size variations will be kept to a minimum.

Attaching / Gluing Disclaimer:

We do not provide glue as we have found certain customers / interior or upholstery shops prefer to use specific products. When attaching all of these new pieces you need to make sure all of the original wood is completely removed, and the surfaces are prepped correctly. For example, all old glue must be completely removed, etc. Sanding or scuffing the metal piece for the console trim / radio bezel is also recommended.

Vinyl Disclaimer- (for 63/64 Riviera standard interior cars):

The vinyl chosen for these pieces were carefully selected and compared to the original to try and match as closely as possible to the original grain / texture. The original grain / texture was not able to be purchased so this is the closest we could find. We recommend replacing all of the console pieces at one time to ensure all of the pieces match.

If you have any questions please let me know