Description

This is a brand new custom made complete black vinyl console trim kit for 1965 Buick Riviera models. By custom made I mean the following – the 1965 Riviera models did not have vinyl on the consoles. These were made for custom applications. 1965 Riviera models only have walnut wood grain on the consoles from the factory.

These kits are in stock and ready to ship!

The 8th picture shows a close up of the new black vinyl.

The last picture shows the dash trim of the 1965 Riviera on the bottom compared to the new vinyl pieces on the top (the grain and texture is very close).

Please fully read all of the disclaimers below.

Fitment / Size Disclaimer:

This is the best fitment due to variations in the size of the original metal pieces. We decided on the size of these pieces since we found that there can be slightly variation in the size of the console trim/radio bezel chrome piece. Also, some customers are having these pieces re-chromed which can also slightly change the size. Lastly the size difference is extremely small. For example, when attaching the console and door pieces, please try to center the piece top to bottom and left to right. When installed centered in both directions, any size variations will be kept to a minimum.

Attaching / Gluing Disclaimer:

We do not provide glue as we have found certain customers / interior or upholstery shops prefer to use specific products. When attaching all of these new pieces you need to make sure all of the original wood is completely removed, and the surfaces are prepped correctly. For example, all old glue must be completely removed, etc. Sanding or scuffing the metal piece for the console trim / radio bezel is also recommended.

Vinyl Disclaimer – (for 65 Riviera):

The vinyl chosen for the radio bezel was carefully selected as we thought it was best to try and match the grain / texture of the 1965 Rivera black specific dash pieces (on either side of the radio bezel).

If you have any questions please let me know